- Frontpage >
- Tips and Inspiration >
- How to lay granite cobblestones – base, pattern and jointing
How to lay granite cobblestones – base, pattern and jointing
Paving with granite cobblestones and setts is beautiful, durable and only gets better with age. Granite stones can last for generations – but only if the base is done properly. A poor base leads to sinking, loose stones and puddles.
In this guide we explain the difference between large cobblestones and cubic setts, how to build the base for both paths and driveways, how to lay and joint the stones, and how many stones you need.
Large cobblestones or cubic setts?
- Cubic cobblestones (setts) are granite stones of about 9-11 cm on all sides and weigh 2-3 kg each. They are easy to lay in arcs and patterns and are used for driveways, patios, edgings and steps. See our range of cubic cobblestones.
- Large cobblestones are bigger, hand-split granite stones of about 21 × 14 × 14 cm and weigh 12-13 kg each. They give a rustic look and are well suited to courtyards and driveways. See our range of granite cobblestones.
Both types are available new and reclaimed. Reclaimed stones from old Danish streets have a worn surface that gives a truly unique patina.
The right base
The base depends on what the paving will be used for:
- Paths and patios: about 10 cm of base – 6-7 cm road base and 6-7 cm bedding layer.
- Driveways with cars: about 20 cm of base – about 17 cm road base and 6-7 cm bedding layer.
For the bedding layer, use paving sand or fill sand. Both layers are compressed when compacted, so lay a little more than you want to end up with. Read more about the base in our guide How to Prepare the Base for Paving.
Excavation and fall
The depth of the excavation is the base plus the height of the stone. For a driveway with cubic setts, you need to dig out about 20 + 10 = 30 cm, and with large cobblestones about 20 + 14 = 34 cm.
Give the paving a fall of about 2 cm per metre away from the house, so rainwater runs off. Remove all topsoil and roots, and compact the bottom of the excavation before laying road base.
How to lay the stones
- Lay road base: Spread the road base in layers of no more than 10 cm at a time, and compact each layer with a plate compactor.
- Set the edging: Set kerbstones or a row of setts in aggregate mix along the edge, so the paving does not spread.
- Screed: Spread the bedding layer and level it with a straight batten to get the right height and fall.
- Lay the stones: Lay the stones close together with a joint of about 1-2 cm. Work from the paving already laid, so you do not step in the bedding layer.
- Tap the stones into place: Use a rubber mallet, and check regularly with a straightedge.
Patterns for setts
Cubic setts can be laid in many patterns:
- Rows: The easiest solution, where the stones are laid in straight rows with staggered joints.
- Arcs (fan pattern): The classic pattern from old streets and squares. It takes a little practice but gives a very beautiful result.
- Town hall paving: Large slabs – e.g. 40 × 40 cm – framed by setts.
- Edgings and bands: One or more rows of setts as an edge around gravel, paving or grass.
Joint and finish the paving
When all the stones are laid, sweep joint sand into the joints. Then run a plate compactor with a rubber mat over the paving, so the stones settle, and sweep in more joint sand. Repeat until the joints are completely full.
Top up the joints again after a few weeks and then as needed. Full joints lock the stones in place and make it harder for weeds to take hold.
How many stones and how much gravel?
- Cubic setts: about 90 per m². 1,000 kg (about 450 stones) covers about 5 m².
- Large cobblestones: about 31 per m². 1,000 kg (about 80 stones) covers about 2.6 m².
Example: A 30 m² driveway with setts needs about 30 × 90 = 2,700 stones (about 6 tonnes), 30 × 0.17 = 5.1 m³ of road base and 30 × 0.06 = 1.8 m³ of bedding material. Remember that road base is compacted, so add 10-20 % extra.
See more calculation examples in How much gravel, sand and soil do I need?, or use our quantity calculator. Read more about delivery of stones and gravel.