- Frontpage >
- Tips and Inspiration >
- Leca in the garden and pots – how to use expanded clay pebbles
Leca in the garden and pots – how to use expanded clay pebbles
Leca® – or expanded clay – consists of small, light pebbles of fired Danish clay. They are porous, keep their shape for many years and are one of the most versatile products you can have in the garden. Leca is used for drainage in pots, to make heavy soil more airy, as a mulch and even for building and preventing slippery surfaces.
In this guide you get an overview of how to use Leca in the garden and on the patio, which type to choose and how much you need. See our full range of Leca clay pebbles.
What is Leca?
Leca stands for "Light Expanded Clay Aggregate". The clay is fired at a high temperature, so it expands into light pebbles with a hard shell and a porous core. This gives a number of advantages:
- Light: Leca weighs only a fraction of gravel and stones.
- Free-draining: Water runs easily between the pebbles.
- Durable: The pebbles do not rot and keep their shape.
- Natural: Leca is made in Denmark from Danish clay.
Leca at the bottom of pots
The best-known use of Leca is as a drainage layer at the bottom of pots. The layer allows excess water to drain away, so the roots do not stand in water and rot.
- Make sure the pot has a hole in the bottom.
- Add a layer of Leca® Flora of 3-5 cm at the bottom – more in large pots.
- If you like, lay a piece of geotextile on top, so the soil is not washed down between the pebbles.
- Fill up with soil and plant.
In very large pots on balconies and roof terraces, you can fill a larger part of the pot with Leca. This saves both soil and weight.
Planters and raised beds on the patio
If your planters or raised beds stand on a patio, a balcony or another hard surface, the water cannot drain into the ground below. Here a drainage layer of Leca at the bottom is a good idea, so the soil does not become waterlogged.
If the raised bed stands directly on the ground in the garden, a drainage layer is usually not needed. Read more in our guide Soil for raised beds – which soil, and how much do you need?.
Leca for soil improvement
If you have heavy clay soil that becomes wet and sticky in winter and hard in summer, you can mix Leca® Flora into the soil. Mix in a ratio of about 1 part Leca to 3 parts soil. This gives an airy and porous soil where roots can grow more easily and water drains better.
Get more good advice in How to Improve the Soil in Your Garden.
Leca as a mulch
A layer of Leca on top of pots reduces the drying out of the soil and gives a neat, uniform look. Leca can also be used as ground cover in beds, where it suppresses weeds. The pebbles are light, so they are best suited to sheltered spots.
Leca for building
Leca® 10-20 Coated has a water-repellent surface that stops moisture from rising from the ground. It is therefore used as a capillary-breaking and insulating layer in building – for example under ground-bearing floors. For building projects, always follow the instructions of your adviser or engineer, so the layer thickness suits the job.
Leca against slippery surfaces
Leca® Safe is an eco-friendly alternative to road salt and heavy grit. Salt can harm dogs' paws, concrete, paving and plants, and grit blocks drains and gullies when spring arrives. Leca Safe is so light that it stays on top when snow thaws and freezes again – so the grip is kept.
How much Leca do you need?
Example 1: A planter of 2 × 0.5 metres with a 10 cm drainage layer needs 2 × 0.5 × 0.10 = 0.1 m³ = 100 litres of Leca.
Example 2: You want to improve a 10 m² bed in the top 20 cm. That is 10 × 0.20 = 2 m³ of soil. With 1 part Leca to 3 parts soil, you need about 2 ÷ 3 ≈ 0.7 m³ = 700 litres of Leca.
See more calculation examples in How much gravel, sand and soil do I need?, or use our quantity calculator. We deliver Leca in bulk bags directly to your address – read more about delivery.